TM SIM No Signal

by

Does your TM SIM card keep showing “No Signal”? Before assuming the worst or contacting technical support, try these quick and effective troubleshooting steps to restore your connection instantly.

Sometimes, a TM SIM card may show no signal if the TM SIM registration is incomplete—make sure your SIM is activated and registered with the network provider to avoid connectivity issues

TM SIM Card No Signal 

Follow the instructions to restore the lost signal and stay connected.

  1. The first step is to turn airplane mode on and off. This action can help resolve connectivity issues and refresh the network connection.
  2. Restart your phone, it may troubleshoot temporary glitches that restrict signal reception.
  3. Carefully remove and reinsert the SIM card. Sometimes, improper insertion or a loose connection causes signal issues.
  4. Wipe the SIM card with a dry tissue or soft cloth. Dust and debris can interfere with network connectivity.
  5. Insert the SIM into another phone to determine whether the issue originates from your phone or the SIM card. If the problem persists, the issue likely stems from the SIM card.
  6. Ensure your device’s carrier settings are up-to-date, as outdated settings may cause connectivity problems.
  7. Navigate to your phone’s settings, choose “Reset Network Settings,” and confirm to reset your device’s network settings. Note that this will remove Wi-Fi and Bluetooth connections, so you’ll need to reconnect them later.

TM SIM Card No Signal on Android

There are some steps to resolve the TM SIM no-signal  issues:

  • Power off your device for 30 seconds and then turn it on. it’s the first simple troubleshooting step.
  • Turn off your Android device, remove the SIM card, and insert it again after 30 seconds. 
  • Sometimes, airplane mode is on, make sure to turn off the airplane mode. 
  • Make sure to change the network type to LTE/3G/2G (Auto). Navigate to the settings, locate the network and internet, and then the mobile network, and set your preferred network type.

Steps to Resolve TM SIM No Signal on iPhone

Follow the instructions below to resolve the no-signal issue on iPhone:

  • Turn off your iPhone and turn it back on after 30 seconds.
  • Remove the SIM card and, after 30 seconds, reinsert the SIM carefully to reconnect to the network.
  • Make sure to turn off the airplane mode, Navigate to settings, then network and internet, and turn it off if it is on.
  • Keep your device’s carrier settings updated by going to settings, then general, and then about. look for the update option.

TM SIM Card No Signal with Globe Network

Just Follow the above steps if you’re using the TM network under the operation of the Globe network and encounter the no signal issue:

TM SIM Card No Signal Abroad

Here are instructions for abroad TM SIM users who are facing the no-signal issue:

  • Make sure to use the appropriate network for the best connection. Navigate to Settings, then Network and Internet, and then Mobile Network, and choose the network type that works well.
  • If the issue persists, restart the device to reconnect to the network properly.
  • If international roaming is off, navigate to Settings > Network & Internet > Mobile Network, and enable Roaming.

FAQs

Why sim card is not connecting to the network?

There are many reasons that we’ve discussed above, but it might be due to too many incorrect lock attempts, blocked by carrier restrictions, lost or stolen devices, or disconnected lines of service.

What should I do if the SIM card is still not connected to the network after troubleshooting?

If the issue persists, after applying the troubleshooting steps, contact TM customer support for further help. 

Can network settings affect the signal strength of my TM SIM card?

Yes, incorrect network settings can affect signal strength. Ensure you’ve set your network type to LTE/3G/2G (Auto) for the best possible connection.

Conclusion 

The no signal issue may often arise in a weak network coverage area or when international roaming is involved. By following the above troubleshooting instructions, you can easily resolve the issue. If the issue persists, you should contact TM customer support for further assistance.

Leave a Comment